A modified tunnel technique to treat multiple gingival recessions: Case Series

Abstract This case series reports a modified tunnel technique with connective tissue graft for the root coverage of multiple Miller Class I, II, and III gingival recessions. The modified approach presents an innovative suture technique to improve the stability and position of the graft. Ten patients with multiple gingival recessions (n=85 teeth) received surgical root coverage treatment. The gingival recession height and width were measured and presented as median, minimum, and maximum values. The percentage of the root coverage after at least 12 months expressed the treatment effectiveness. The Shapiro-Wilk test evaluated the normality; pared Wilcoxon test determined the exact P-value for the differences in the height of the gingival recession before and after surgical treatment (α = 0.05). An average of 97.9% (± 5.6%, p < 0.0001) root coverage after treatment occurred, and 73 out of 85 recessions presented complete root coverage after 12 months. Treatment of Miller class I and II gingival recessions resulted in root coverage higher than 99 and class III higher than 95% (p < 0.0001). The presented case series report the efficacy of a modified surgical technique promoting more than 95% of root coverage after 12 months in multiple Miller Class I, II, and III gingival recessions. Well-designed blind randomized controlled trials are needed to validate the proposed technique.

Resumo Esta série de casos relata uma técnica de túnel modificada com enxerto de tecido conjuntivo para o recobrimento radicular de múltiplas recessões gengivais Classe I, II e III de Miller. A abordagem modificada apresenta uma técnica de sutura inovadora para melhorar a estabilidade e a posição do enxerto. Dez pacientes com múltiplas recessões gengivais (n=85 dentes) receberam tratamento cirúrgico de recobrimento radicular. A altura e a largura da recessão gengival foram mensuradas e apresentadas como valores medianos, mínimos e máximos. A eficácia do tratamento foi expressa como uma porcentagem da cobertura radicular após pelo menos 12 meses. O teste de Shapiro-Wilk avaliou a normalidade; o teste de Wilcoxon pared determinou o valor P exato para as diferenças entre a altura da recessão gengival antes e após o tratamento cirúrgico (α = 0,05). Uma média de 97,9% (± 5,6%, p < 0,0001) de cobertura radicular após o tratamento ocorreu, e 73 das 85 recessões apresentaram cobertura radicular completa após 12 meses. O tratamento das recessões gengivais classe I e II de Miller resultou em recobrimento radicular superior a 99 e classe III superior a 95% (p < 0,0001). A série de casos apresentada relata a eficácia de uma técnica cirúrgica modificada promovendo mais de 95% de cobertura radicular após 12 meses em múltiplas recessões gengivais Classe I, II e III de Miller. Ensaios controlados randomizados cegos bem desenhados são necessários para validar a técnica proposta.

Ionic concentration in periradicular medium after dissolution of endodontic file fragments: an in vitro study

Abstract The aim of this study was to obtain ionic quantification in periradicular medium after diffusion tests of the solution used inside root canals during the electrochemical dissolution of endodontic file fragments and the NiTi-containing dissolution product via an apical foramen. Thirty single-rooted extracted human teeth had root canals prepared and were attached to Eppendorf tubes filled with sterile saline. The samples were divided into 3 groups (n = 10) according to the solution used inside the root canal during the diffusion tests: Group 1: [NaF 12 g/L + NaCl 1 g/L]; Group 2: [NaF 12 g/L + NaCl 1 g/L + NiTi 0.50 g/L]; Group 3: [NaF 6 g/L + NaCl 0.5 g/L + NiTi 0.25 g/L]. The sample in each Eppendorf tube was then analyzed to assay the ionic quantification in periradicular medium. The groups were compared in relation to ionic quantifications (Kruskal-Wallis and Dunn's tests, p ≤ 0.05). Group 2 showed significantly higher F-, Ni and Ti quantities than groups 1 and 3 (p < 0.05). Group 3 showed significantly higher Ti and Ni quantities than group 1, where no measurable quantities of Ti and Ni were observed (p < 0.05). The conclusions were that a 50% dilution of the NiTi-containing dissolution product resulted in significantly lower F-, Ni and Ti quantities compared to the undiluted product. The quantifications observed here suggest that irrigation is recommendable during the electrochemical dissolution process to reduce the resultant ion concentrations in both the root canal and the periradicular medium.

Cone-beam computed tomography cinematic rendering: clinical, teaching and research applications

Abstract Cone-beam computed tomography (CBCT) is an essential imaging method that increases the accuracy of diagnoses, planning and follow-up of endodontic complex cases. Image postprocessing and subsequent visualization relies on software for three-dimensional navigation, and application of indexation tools to provide clinically useful information according to a set of volumetric data. Image postprocessing has a crucial impact on diagnostic quality and various techniques have been employed on computed tomography (CT) and magnetic resonance imaging (MRI) data sets. These include: multiplanar reformations (MPR), maximum intensity projection (MIP) and volume rendering (VR). A recent advance in 3D data visualization is the new cinematic rendering reconstruction method, a technique that generates photorealistic 3D images from conventional CT and MRI data. This review discusses the importance of CBCT cinematic rendering for clinical decision-making, teaching, and research in Endodontics, and a presents series of cases that illustrate the diagnostic value of 3D cinematic rendering in clinical care.

Method to determine the root canal anatomic dimension by using a new cone-beam computed tomography software

Abstract This study discusses a method to determine the root canal anatomic dimension by using e-Vol DX software. The methodology consists in initially establishes the correct positions which will be measured, define the point on the edge of the anatomical structure, and next adjust the intermediate position in the grayscale of CBCT image. Afterward, thin sections (0.10 mm) are obtained from 3D reconstructed slices in the filter for the measurements, in order to determine the edge of the anatomical surface in the axial plane. A replication of positions in 3D mode is done in multiplanar reconstruction (MPR) of CBCT images, where the correct position is established with the aid of a positioning guide. The 3D density is adjusted so that it is in the same dimension as the 2D image, and a dimension calibration occurs to the point where there is a coincidence between 3D and 2D. This calibration is done only at the beginning of the measurement. Next, the intermediate position of the division between the grayscale is verified in the CBCT scan. Once one side has been completed, it is moved to the other side and follows the same guidelines described above. When setting the position of the courses in the other margin, being that 2D mode is used as reference. Thus, one obtains the required measure, being checked in the two points. The creation of this filter in the e-Vol DX software for measurement, and its appropriate management, allows more effective applications when it is desired to obtain diameters of anatomical structures.

Resumo Este estudo discute um método para determinar a dimensão anatômica do canal radicular usando o software e-Vol DX. A metodologia consiste em inicialmente estabelecer as posições corretas que serão medidas, definir o ponto na borda da estrutura anatômica e ajustar a posição intermediária na escala de cinza na imagem em tomografia computadorizada de feixe cônico (TCFC). A seguir, slices finos (0,10mm) são obtidos a partir de cortes 3D reconstruídos no filtro para as medidas, a fim de determinar a borda da superfície anatômica no plano axial. Uma replicação de posições no modo 3D é feita em reconstrução multiplanar (MPR) em imagens de TCFC, onde a posição correta é estabelecida com o auxílio de um guia de posicionamento. A densidade 3D é ajustada de modo a ficar na mesma dimensão da imagem 2D, e então realiza-se uma calibração de dimensão até o ponto em que há uma coincidência entre o modo 3D e 2D. Essa calibração é feita apenas no início da medição. Posteriormente, a posição intermediária da divisão entre a escala de cinza é verificada na TCFC. Uma vez que um lado tenha sido concluído, o guia é movido para o outro lado, e segue-se as mesmas diretrizes descritas. Define-se a posição do marcador na outra margem, sendo que o modo 2D usado como referência. Assim, obtém-se a medida necessária, sendo verificado nas duas margens do canal radicular. A criação deste filtro no software e-Vol DX para medição e seu uso apropriado permite aplicações eficazes quando se deseja obter diâmetros de estruturas anatômicas.

In vitro and in vivo biocompatibility of reoss® in powder and putty configurations

Article This study evaluated comparatively two configurations (powder and putty) of a composite biomaterial based on PLGA (Poly(lactide-co-glycolide)/nanoescale hydroxyapatite (ReOss®, Intra-Lock International) through microscopic morphology, in vitro cytotoxicity, biocompatibility and in vivo response as a bone substitute. SEM and EDS characterized the biomaterials before/after grafting. Cytocompatibility was assessed with murine pre-osteoblasts. Osteoconductivity and biocompatibility were evaluated in White New Zealand rabbits. Both configurations were implanted in the calvaria of eighteen animals in non-critical size defects, with blood clot as the control group. After 30, 60 and 90 days, the animals were euthanized and the fragments containing the biomaterials and controls were harvested. Bone blocks were embedded in paraffin (n=15) aiming at histological and histomorphometric analysis, and in resin (n=3) aiming at SEM and EDS. Before implantation, the putty configuration showed both a porous and a fibrous morphological phase. Powder revealed porous particles with variable granulometry. EDS showed calcium, carbon, and oxygen in putty configuration, while powder also showed phosphorus. After implantation EDS revealed calcium, carbon, and oxygen in both configurations. The materials were considered cytotoxic by the XTT test. Histological analysis showed new bone formation and no inflammatory reaction at implant sites. However, the histomorphometric analysis indicated that the amount of newly formed bone was not statistically different between experimental groups. Although both materials presented in vitro cytotoxicity, they were biocompatible and osteoconductive. The configuration of ReOss® affected morphological characteristics and the in vitro cytocompatibility but did not impact on the in vivo biological response, as measured by the present model.

Resumo Este estudo avaliou comparativamente duas configurações (pó e massa) de um biomaterial composto com base de PLGA (Poli(láctico-co-glicólico)/hidroxiapatita em nanoescala (ReOss®, Intra-Lock International) através da morfologia microscópica, citotoxicidade in vitro, biocompatibilidade e resposta in vivo como substituto ósseo. MEV e EDS caracterizaram os biomateriais antes/após o enxerto. A citocompatibilidade foi avaliada em pré-osteoblastos murinos. A osteocondutividade e a biocompatibilidade foram avaliadas em coelhos Branco da Nova Zelândia. Ambas as configurações foram implantadas na calvária de dezoito animais em defeitos não-críticos, com coágulo sanguíneo como grupo controle. Após 30, 60 e 90 dias, os animais foram eutanasiados e os fragmentos contendo os biomateriais e controles coletados. Blocos ósseos foram embebidos em parafina (n=15) destinados às análises histológica e histomorfométrica, e em resina (n=3) destinadas à MEV e EDS. Antes da implantação, a configuração massa mostrou ambas fases morfológicas porosa e fibrosa. O pó revelou partículas porosas com granulometria variável. EDS mostrou cálcio, carbono e oxigênio na configuração massa, enquanto o pó mostrou também fósforo. Após a implantação a EDS revelou cálcio, carbono e oxigênio em ambas configurações. Os materiais foram considerados citotóxicos pelo teste XTT. A análise histológica mostrou nova formação óssea e nenhuma reação inflamatória nos sítios de implante. Entretanto, a análise histomorfométrica indicou que a quantidade de osso neoformado não foi estatisticamente diferente entre os grupos experimentais. Embora ambos os materiais tenham apresentado citotoxicidade in vitro, foram biocompatíveis e osteocondutores. A configuração do ReOss® afetou as características morfológicas e a citocompatibilidade in vitro, porém não impactou a resposta biológica in vivo, como medido pelo presente modelo.

Chronic Periodontitis and RANKL/OPG Ratio in Peri-Implant Mucosae Inflammation

Abstract tHistory of chronic periodontitis (CP) is a risk factor for oseointegration failure. The osteoclastogenesis system (RANK, RANKL and OPG) is critical for bone homeostatic control. We investigated the levels of OPG and RANKL in peri-implant tissues from volunteers with and without a history of CP and their association with mucosae inflammation. This is a single-blind case-contro study. Diagnosis of a history of CP and peri-implant examination was performed on 46 volunteers, divided into control (without history of CP, n=26) and CP group (with history of CP, n=20). Gingival biopsies were harvested during implant exposure. Quantitative PCR evaluated OPG/RANKL mRNA expressions. OPG and RANKL proteins were analyzed by western blot and immunohistochemistry assay. The chi-square test analyzed the significance of nominal variables between groups while continuous variables were analyzed by T-test or Mann-Whitney test, after Shapiro-Wilk test evaluation. The 2-ΔΔCT Livak method calculation evaluated the gene expression. Values of p<0.05 were considered statistically significant. Volunteers with CP history had 23 times higher chance of developing mucosae inflammation. High mucosae levels of RANKL (p=0.04) and RANKL/OPG (p=0.001) mRNA expressions were observed in CP group. CP volunteers showed increased RANKL protein levels in opposition to decreased OPG expression. Even without active periodontitis, volunteers with a history of CP had elevated gingival levels of RANKL/OPG and higher correlation with peri-implant mucosae inflammation and implant loss.

Resumo A história de periodontite crônica (CP) é um fator de risco para falhas na osseointegração. O sistema de osteoclastogênese (RANK, RANKL e OPG) é crucial para o controle da homeostase óssea. O objetivo deste estudo foi investigar os níveis de OPG e RANKL no tecido peri-implantar de voluntários com e sem histórico de CP e sua associação com inflamação da mucosa. Este é um estudo tipo caso-controle. O exame para diagnóstico de CP e na região peri-implantar foi realizado em 46 voluntários, divididos em controle (sem história CP, n=26) e grupo CP (com histórico de CP, n=20). Descartes gengivais foram obtidos durante a exposição do implante. PCR quantitativo avaliou a expressão do RNAm de OPG/RANKL. As proteínas OPG e RANKL foram analisadas por western blot e imunohistoquímica. O teste do qui-quadrado analisou a significância entre as variáveis nominais enquanto as variáveis contínuas foram analisadas pelo teste-t e Mann-Whitney, após o teste de Shapiro-wilk. O método do Livak 2--ΔΔCT avaliou a expressão gênica. Os voluntários com CP apresentaram 23 vezes mais chances de desenvolver inflamação da mucosa. Expressão elevada no RNAm de RANKL (p=0.04) e RANKL/OPG (p=0.001) foram observadas no grupo CP. Voluntários com CP mostraram aumento dos níveis da proteína RANKL em contraste com diminuída expressão de OPG. Mesmo sem periodontite ativa, voluntários com histórico de CP apresentaram elevado nível gengival de RANKL/OPG e alta correlação com inflamação peri-implantar e perda do implante.

Alveolar bone repair with strontium- containing nanostructured carbonated hydroxyapatite

ABSTRACT Objective: This study aimed to evaluate bone repair in rat dental sockets after implanting nanostructured carbonated hydroxyapatite/sodium alginate (CHA) and nanostructured carbonated hydroxyapatite/sodium alginate containing 5% strontium microspheres (SrCHA) as bone substitute materials. Methods: Twenty male Wistar rats were randomly divided into two experimental groups: CHA and SrCHA (n=5/period/group). After one and 6 weeks of extraction of the right maxillary central incisor and biomaterial implantation, 5 μm bone blocks were obtained for histomorphometric evaluation. The parameters evaluated were remaining biomaterial, loose connective tissue and newly formed bone in a standard area. Statistical analysis was performed by Mann-Withney and and Wilcoxon tests at 95% level of significance. Results: The histomorphometric results showed that the microspheres showed similar fragmentation and bio-absorbation (p>0.05). We observed the formation of new bones in both groups during the same experimental periods; however, the new bone formation differed significantly between the weeks 1 and 6 (p=0.0039) in both groups. Conclusion: The CHA and SrCHA biomaterials were biocompatible, osteoconductive and bioabsorbable, indicating their great potential for clinical use as bone substitutes.

Assessing the association between hypoxia during craniofacial development and oral clefts

Abstract Objectives To evaluate the association between hypoxia during embryo development and oral clefts in an animal model, and to evaluate the association between polymorphisms in the HIF-1A gene with oral clefts in human families. Material and Methods The study with the animal model used zebrafish embryos at 8 hours post-fertilization submitted to 30% and 50% hypoxia for 24 hours. At 5 days post-fertilization, the larvae were fixed. The cartilage structures were stained to evaluate craniofacial phenotypes. The family-based association study included 148 Brazilian nuclear families with oral clefts. The association between the genetic polymorphisms rs2301113 and rs2057482 in HIF-1A with oral clefts was tested. We used real time PCR genotyping approach. ANOVA with Tukey's post-test was used to compare means. The transmission/disequilibrium test was used to analyze the distortion of the inheritance of alleles from parents to their affected offspring. Results For the hypoxic animal model, the anterior portion of the ethmoid plate presented a gap in the anterior edge, forming a cleft. The hypoxia level was associated with the severity of the phenotype (p<0.0001). For the families, there was no under-transmitted allele among the affected progeny (p>0.05). Conclusion Hypoxia is involved in the oral cleft etiology, however, polymorphisms in HIF-1A are not associated with oral clefts in humans.

Accelerated Healing Period with Hydrophilic Implant Placed in Sheep Tibia

Abstract The objective of this study was to evaluate the early osseointegration of two different implants surfaces, a sandblasted and acid-etched surface (TN) compared with same geometry and surface roughness modified to be hydrophilic/wettable by conditioning in an isotonic solution of 0.9% sodium-chloride (TA) through histological and histomorphometric analysis after sheep tibia implantation. Forty dental implants, divided in two groups (TN and TA) were placed in the left tibia of twenty healthy, skeletally mature Santa Ines sheep (n=5/experimental period). After 7, 14, 21 and 28 days post-implantation, the samples were removed and the sheep were kept alive. Analysis of resin sections (30 μm) allowed the quantification of bone area (BA) and bone-to-implant contact (BIC). TA group presented nearly 50% increase in BA at 14 days (p<0.001, ANOVA - Tukey's post test) compared with 7 days. The TA presented higher values than the TN for BA and BIC at 14, 21, and 28 days after placement, stabilizing bone healing. TA hydrophilic surface promoted early osseointegration at 14 and 21 days compared to TN, accelerating bone healing period post-implant placement in sheep tibia.

Resumo O objetivo deste estudo foi avaliar a osseointegração precoce de duas superficies diferentes de implantes, uma superfície tratada com jateamento e ataque ácido (TN) comparada com outra superfície com a mesma geometria e rugosidade e modificada com hidrofilicidade / molhabilidade através do condicionamento em solução isotônica de 0,9% de cloreto de sódio (TA) através de análises histológica e histomorfométrica após a implantação em tíbia de ovelhas. Quarenta implantes dentários, divididos em dois grupos (TN e TA), foram implantados na tíbia esquerda de vinte ovelhas Santa Inês (n=5/período experimental) saudáveis e esqueleticamente maduras. Após 7, 14, 21 e 28 dias pós-implantação, as amostras foram coletadas e as ovelhas foram mantidas vivas. A análise dos cortes em resina (30 μm) permitiu a quantificação da área de osso (BA) e do contato osso-implante (BIC). O grupo TA apresentou aumento de quase 50% na BA aos 14 dias (p <0,001, ANOVA - pós teste de Tukey) em comparação com 7 dias. O grupo TA apresentou valores maiores do que o TN para BA e BIC aos 14, 21 e 28 dias após a implantação, estabilizando a cicatrização óssea. A superfície hidrofílica TA promoveu uma osseointegração precoce aos 14 e 21 dias em relação à TN, acelerando o período de cicatrização óssea após a instalação dos implantes em tíbias de ovelha.

Genetic Polymorphism in MMP9 May Be Associated With Anterior Open Bite in Children

Abstract Anterior open bite (AOB) has a multifactorial etiology caused by the interaction of sucking habits and genetic factors. The aim of this study was to evaluate the association between AOB and polymorphisms in genes that encode Matrix metalloproteinases (MMPs) and their tissue inhibitors (TIMPs). Four hundred and seventy-two children that presented at least one sucking habit were evaluated. Children were examined clinically for the presence of AOB. Genomic DNA was extracted from saliva. Genotyping of the selected polymorphisms in MMP2, MMP3, MMP9, TIMP1 and TIMP2 was carried out by real-time PCR using the TaqMan method. Allele and genotype frequencies were compared between the groups with and without AOB using the PLINK® software in a free and in a recessive model using a chi-square test. Logistic regression analysis was implemented (p≤0.05). Two hundred nineteen children had AOB while 253 did not. The polymorphism rs17576 in MMP9 was significantly associated with AOB (p=0.009). In a recessive model GG genotype was a protective factor for AOB (p=0.014; OR 4.6, 95%CI 1.3-16.2). In the logistic regression analysis, none of the genes was associated with AOB. In conclusion, the polymorphism rs17576 (glutamine for arginine substitution) in MMP9 was a protective factor for AOB.

Resumo A mordida aberta anterior apresenta uma etiologia multifatorial causada pela interação entre hábitos de sucção e fatores genéticos. O objetivo deste estudo foi avaliar a associação entre mordida aberta anterior e polimorfismo nos genes que codificam as metaloproteinases da matriz (MMPs) e seus inibidores teciduais (TIMPs). Foram avaliadas 472 crianças que apresentvam pelo menos um hábito de sucção. As crianças foram clinicamente examinadas para avaliar a presença de mordida aberta anterior. DNA genômico foi extraído da saliva. A genotipagem dos polimorfismos selecionados em MMP2, MMP3, MMP9, TIMP1 e TIMP2 foi realizada por PCR em tempo real, usando o método de TaqMan. As frequências alélicas e genotípicas foram comparadas entre os grupos com e sem mordida aberta anterior usando o software PLINK®. Duzentas e dezenove crianças apresentavam mordida aberta anterior enquanto 253 não a apresentavam. O polimorfismo rs17576 em MMP9 estava significativamente associado com mordida aberta anterior (p=0,009). No modelo recessivo (GG versus AG+AA) o genótipo GG foi um fator protetor para mordida aberta anterior (p=0,014; OR 4,6; 95%CI 1,3- 16,2). Concluindo, o polimorfismo rs17576 (substituição de glutamina por arginina) em MMP9 está associado com mordida aberta anterior. Os resultados obtidos suportam a hipótese de que fatores genéticos estão envolvidos com a etiologia da mordida aberta anterior.

Avaliação clínica de compósito constituidos por fosfato de cálcio nanoestruturado e biopolímero associado à células osteoprogenitoras como alternativa à biocerâmica para a uso na rede SUS na reneração óssea / Clinical evaluation of composite constitude by nanostructured calcium phosphate and biopolymer associated with osteoprogenitor celss as an alternative to bioceramics for use in the S*S network in bone regeneration

Os biomateriais nanoestruturados têm se destacado como elementos estratégicos para a medicina regenerativa devido à sua grande área específica, a sua característica de atuar como veículo portador e libera dor de fatores de crescimento, células e pela sua mobilidade no plasma, no meio extra e intra-celular. Nos últimos anos, a equipe executora deste estudo, constituída por pesquisadores do CBPF, UFF, UFRJ e INMETRO têm concentrado seus esforços no desenvolvimento de novos fosfatos de cálcio na forma nanoestruturada e com substituições iônicas para uso clí nico. Estas características potencializam a bioabsorção do material e sua eficiência na regeneração tecidual, bem como seu uso como nanocarreador de biomoléculas (proteínas, peptídeos, fatores de crescimento e fármacos). Neste estudo foi produzido e avaliado clinicamente um novo biomaterial para a regeneração óssea, seguindo o princípio de “quality by desing”, visando aumentar sua eficiência em procedimentos clínicos específicos tais como o tratamento do edentulismo...

Physico-chemical and Histomorphometric Evaluation of Zinc-containing Hydroxyapatite in Rabbits Calvaria

Abstract The aim of this study was to characterize the physico-chemical properties and bone repair after implantation of zinc-containing nanostructured porous hydroxyapatite scaffold (nZnHA) in rabbits' calvaria. nZnHA powder containing 2% wt/wt zinc and stoichiometric nanostructured porous hydroxyapatite (nHA - control group) were shaped into disc (8 mm) and calcined at 550 °C. Two surgical defects were created in the calvaria of six rabbits (nZnHA and nHA). After 12 weeks, the animals were euthanized and the grafted area was removed, fixed in 10% formalin with 0.1 M phosphate buffered saline and embedded in paraffin (n=10) for histomorphometric evaluation. In addition, one sample from each group (n=2) was embedded in methylmethacrylate for the SEM and EDS analyses. The thermal treatment transformed the nZnHA disc into a biphasic implant composed of Zn-containing HA and Zn-containing β-tricalcium phosphate (ZnHA/βZnTCP). The XRD patterns for the nHA disc were highly crystalline compared to the ZnHA disc. Histological analysis revealed that both materials were biologically compatible and promoted osteoconduction. X-ray fluorescence and MEV-EDS of nZnHA confirmed zinc in the samples. Histomorphometric evaluation revealed the presence of new bone formation in both frameworks but without statistically significant differences (p>0.05), based on the Wilcoxon test. The current study confirmed that both biomaterials improve bone repair, are biocompatible and osteoconductive, and that zinc (2wt%) did not increase the bone repair. Additional in vivo studies are required to investigate the effect of doping hydroxyapatite with a higher Zn concentration.

Resumo O objetivo deste estudo foi caracterizar físico-químicamente e avaliar o reparo ósseo de discos de hidroxiapatita porosa contendo zinco após a implantação em calvária de coelhos (nZnHA). O pó de nZnHA e o pó hidroxiapatita porosa estequiométrica nanoestruturada (controle - nHA) foram confeccionados em discos (8 mm) e calcinados a 550˚C. Dois defeitos cirúrgicos foram criados na calvária de seis coelhos para a implantação dos discos. Após 12 semanas, os animais foram eutanasiados e as áreas enxertadas foram removidas, fixadas em formol a 10% e embebidas em parafina (n=10) para avaliação histomorfométrica. Além disso, uma amostra de cada grupo (n=2) foi embebida em metilmetacrilato para análise de MEV e EDS. O tratamento térmico dos discos de nZnHA transformou-os em implantes bifásicos compostos por HA contendo Zinco e β fosfato tricálcico com Zinco (ZnHA/βZnTCP). Os discos de nHA, apresentaram-se altamente cristalinos e com baixa solubilidade quando comparados aos discos de ZnHA. A análise histológica revelou que ambos os materiais foram biologicamente compatíveis e promoveram a osteocondução. As análises de FRX e MEV-EDS confirmaram a presença do zinco nas amostras de nZnHA. A avaliação histomorfométrica revelou a presença de neoformação óssea em ambos os grupos, porém sem diferenças estatísticas entre eles, com base no teste de Wilcoxon (p>0,05). O presente estudo confirmou que ambos os biomateriais otimizaram o reparo ósseo, foram biocompatíveis e osseocondutivos e a presença do zinco não favoreceu o reparo ósseo. Estudos adicionais in vivo devem ser conduzidos a fim de investigar o efeito de maiores concentrações de zinco.

Haplotypes in BMP4 and FGF Genes Increase the Risk of Peri-Implantitis

Abstract Despite the success of osseointegrated implants, failures have increased significantly, associated with development of peri-implantitis. Multiple factors influence the peri-implant bone loss, including environmental and genetic causes. BMPs (Bone morphogenetic proteins) are growth factors that induce bone formation. FGF (fibroblast growth factors) and their receptors (FGFRs) play important roles by controlling the levels of cell proliferation, differentiation and migration. BMP/FGF relationship is responsible for promoting bone regeneration and bone loss. The aim of this study was to analyze the correlation between BMP4, FGF3, FGF10 and FGFR1 genes and peri-implant bone loss. Two hundred and fifteen volunteers, with 754 dental implants, were submitted to oral examination and divided in healthy group (n=129) and peri-implantitis group (n=86). Thirteen polymorphisms in BMP4, FGF3, FGF10 and FGFR1 genes were analyzed individually and in haplotype. The chi-square test correlated genotypes, allelic and haplotype frequencies. Values of p<0.05 were considered significant. Volunteers with peri-implantitis demonstrated high incidence of total edentulism (p<0.0001) and thin peri-implant phenotype (p<0.04). Higher incidence of spontaneous bleeding, plaque and implant mobility was observed in peri-implantitis group (p<0.0001 for all). The TT polymorphic genotype for BMP4 rs2761884 was associated with healthy peri-implant (p=0.01). FGF3 rs4631909 (TT+CT genotype) also showed association with the control group (p=0.04). The frequency of C allele for FGF3 rs4631909 showed a tendency for association with peri-implantitis (p=0.08). FGF10 CCTG (p=0.03), BMP4 GAAA (p=0.05) and GGGA (p=0.02) haplotypes were associated with peri-implantitis (p=0.03). Therefore, it may be concluded that BMP4 and FGF10 haplotypes are associated with peri-implantitis.

Resumo Apesar do alto índice de sucesso em implantodontia, falhas tem aumentado drasticamente, estando associadas ao desenvolvimento de peri-implantite. A perda óssea peri-implantar é influenciada por múltiplos fatores, incluindo causas genéticas e ambientais. As BMPs (proteínas ósseas morfogenéticas) são fatores de crescimento indutores da formação óssea. Os FGFs (fatores de crescimento dos fibroblastos) e seus receptores (FGFRs) desenvolvem importante função na proliferação, diferenciação e migração celular. A relação BMP/FGF é responsável pela regeneração e perda óssea. O objetivo deste estudo foi estudar a possível correlação entre os genes BMP4, FGF3, FGF10 e FGFR1 e a perda óssea peri-implantar. Duzentos e quinze voluntários, com 754 implantes, foram submetidos ao exame oral e divididos em grupo saúde (n=129) e peri-implantite (n=86). Treze polimorfismos nos genes BMP4, FGF3, FGF10 e FGFR1 foram analisados individualmente e como haplótipos. O teste do qui-quadrado correlacionou as frequências dos genótipos, alelos e haplótipos. Valores de p<0,05 foram considerados estatisticamente significantes. Voluntários com peri-implantite mostraram alta incidência de edentulismo total (p<0,0001) e biotipo periodontal fino (p<0,04). Sangramento espontâneo, placa e mobilidade do implante foram altamente incidentes no grupo peri-implantite (p<0,0001). O genótipo polimórfico TT para BMP4 rs2761884 foi associado com saúde peri-implantar (p=0,01). FGF3 rs4631909 (genótipos TT+CT) mostraram associação com o grupo controle (p=0,04). A frequência do alelo C para FGF3 rs4631909 mostrou uma tendência de associação com peri-implantite (p=0,08). Os haplótipos FGF10 CCTG (p=0,03), BMP4 GAAA (p=0,05) e GGGA (p=0,02) foram associados com peri-implantite (p=0,03). Sendo assim, conclui-se que os haplótipos BMP4 e FGF10 estão associados com peri-implantite.

Long-Term Cytotoxicity, pH and Dissolution Rate of AH Plus and MTA Fillapex

Abstract The aim of the present study was to verify the long-term cytotoxic effects of the MTA Fillapex and to compare them with AH Plus. Dissolution rate and pH were also evaluated. Human osteoblast cells were incubated with elutes of fresh specimens from AH Plus and MTA Fillapex, and with elutes of the same specimens for 4 successive weeks. Elute's pH was evaluated at each time point. A multiparametric cell viability assay was performed. For dissolution rate, ISO methodology was used. The results were analyzed by one-way analysis of variance, complemented with the Tukey post-test (p<0.05). No significant difference was found among the materials when fresh mixed (p>0.05). After 1 week, AH Plus became non-cytotoxic on all three evaluated parameters. Conversely, MTA Fillapex remained severely and mildly cytotoxic over the entire experimental period (p<0.05). The dissolution rate of AH Plus was significantly lower than MTA Fillapex at all time points (p>0.05). The pH of AH Plus was significantly lower than MTA Fillapex at the second and third week (p<0.05). In the other tested time points no statistical difference was observed. In conclusion, MTA Fillapex remained cytotoxic after 4 weeks and its cytotoxicity may be related to the high dissolution rate of this material.

Resumo O objetivo do presente estudo foi verificar os efeitos citotóxicos de longo prazo da MTA Fillapex e comparar com os do AH Plus. Solubilidade e pH também foram avaliados. Osteoblastos humanos foram incubados com elutos de amostras frescas de AH Plus e MTA Fillapex, e com elutos dos mesmos espécimes pelas 4 semanas seguintes. O pH foi avaliado a cada semana. Um ensaio multiparamétrico de viabilidade celular foi realizado. Para solubilidade foi utilizada metodologia ISO. Os resultados foram analisados por ANOVA, complementada com o pós-teste de Tukey (p<0,05). Nenhuma diferença significativa foi encontrada entre os materiais frescos quando avaliados em relação a citotoxicidade (p>0,05). Depois de uma semana, o AH Plus tornou-se não-citotóxico em todos os três parâmetros avaliados. Por outro lado, MTA Fillapex permaneceu citotóxico durante todo o período experimental (p<0,05). A solubilidade do AH Plus foi significativamente menor do MTA Fillapex para todos os períodos avaliados (p>0,05). O pH da AH Plus foi significativamente menor do que o MTA Fillapex na segunda e na terceira semana (p<0,05). Nos outros períodos testados não houve diferença estatística. Em conclusão, o MTA Fillapex permaneceu citotóxico após 4 semanas e a sua citotoxicidade pode estar relacionada à elevada solubilidade deste material.

Anthropometric study of the knee and its correlation with the size of three implants available for arthroplasty / Estudo antropométrico do joelho e sua correlação com o tamanho de três implantes disponíveis para artroplastia

To define the anthropometric profile of the knee in a Brazilian population with gonarthrosis using intraoperative measurements; and to evaluate the compatibility of three implants available for total knee arthroplasty. METHODS: Morphometric data were collected prospectively from 117 subjects with gonarthrosis. Six dimensions in the distal femur and two in the proximal tibia were documented in 118 knees while performing total arthroplasty. These data were compared with the dimensions of three implants available for total knee arthroplasty. RESULTS: The statistical analysis showed that more than a quarter of the patients presented an unsatisfactory relationship between the knee and prosthesis. CONCLUSION: The implants evaluated need to be adjusted to better fit Brazilian patients.

Definir o perfil antropométrico do joelho em população brasileira portadora de gonartrose, com o uso da mensuração intraoperatória, e avaliar a compatibilidade de três implantes disponíveis para artroplastia total do joelho. MÉTODOS: Foram coletados, de forma prospectiva, os dados morfométricos de 117 pacientes portadores de gonartrose. Documentaram-se seis dimensões no fêmur distal e duas na tíbia proximal em 118 joelhos, durante a artroplastia total. Esses dados foram comparados com as dimensões dos três implantes disponíveis para artroplastia total do joelho. RESULTADOS: A análise estatística revelou que mais de um quarto dos pacientes apresentou relação inadequada entre os joelhos e as próteses. CONCLUSÃO: Os implantes avaliados necessitam de ajustes para melhor atender aos pacientes brasileiros.

MMP13, TIMP2 and TGFB3 Gene Polymorphisms in Brazilian Chronic Periodontitis and Periimplantitis Subjects

Abstract Subjects susceptible to chronic periodontitis (CP) show a high risk for the development of peiimplantitis (PI). Both diseases are multifactorial, presenting similarities in their pathophysiology and polygenic profile. MMP-13 (matrix metalloproteinases 13/ collagenase 3) is a collagenolytic enzyme, which expression is induced by TGF beta 3 (transforming growth factor type 3) in human gingival fibroblasts and inhibited by TIMP-2 (tissue inhibitor of metalloproteinase type 2). The aim of this study was to investigate the occurrence of peiimplantitis (PI) in subjects with history of chronic periodontitis (CP) and polymorphisms frequency in MMP13, TIMP2 and TGFB3 genes. One hundred and sixty-three volunteers received dental implant placement were submitted to oral and radiographic examination in order to identify past history of CP or presence of PI. Volunteers were divided into 4 groups: Control (without PI and CP, n=72), CP (with CP and without PI, n=28), PI (with PI and without CP, n=28) and diseased (with CP and PI, n=35). The chi-square test correlated genotypes in specific regions of MMP13 (rs2252070), TIMP2 (rs7501477) and TGFB3 (rs2268626) genes, considering the interaction between CP and PI. The results showed that volunteers with CP had 3.2 times more susceptibility to develop PI (p=0.0004) compared to those without CP. No significant association was observed in MMP13, TIMP2 and TGFB3 genes with CP or PI. CP is a risk factor to develop PI, however, there is no association of both diseases with polymorphisms in the MMP13, TIMP2 and TGFB3 genes.

Resumo Indivíduos susceptíveis à periodontite crônica (CP) apresentam alto risco para o desenvolvimento de periimplantite (PI). Ambas doenças são multifatoriais e apresentam similaridades na patofisiologia e perfil poligênico. A MMP-13 (metaloproteinase da matriz tipo 13) é uma enzima colagenolítica cuja expressão é induzida por TGF beta 3 (fator transformador do crescimento tipo 3) nos fibroblastos gengivais humanos e inibida por TIMP-2 (inibidor tecidual de metaloproteinase tipo 2). O objetivo deste estudo foi investigar a ocorrência de periimplantite em sujeitos com periodontite crônica e a frequência dos polimorfismos nos genes MMP13, TIMP2 e TGFB3. Cento e sessenta e três voluntários submetidos à instalação de implantes endósseos foram analisados clínica e radiograficamente quanto à presença de histórico de CP e PI, sendo divididos em 4 grupos: Controle (sem história de CP e PI, n=72), CP (com CP e sem PI, n=28), PI (com PI e sem CP, n=28) e Doentes (com CP e PI, n=35). O teste do qui-quadrado correlacionou os genótipos nas regiões dos genes MMP13 (rs2252070), TIMP2 (rs7501477) e TGFB3 (rs2268626), considerando a interação entre CP e PI. Os resultados mostraram que voluntários com CP possuem 3.2 vezes mais chances de desenvolver PI (p=0.0004) comparados aos sem CP. Nenhuma associação significativa foi observada entre os genes MMP13, TIMP2 e TGFB3 e CP ou PI. A CP é um fator de risco ao desenvolvimento de PI, no entanto, não há associação entre ambas as doenças com polimorfismos nos genes MMP13, TIMP2 e TGFB3.

Histomorphometric evaluation of strontium-containing nanostructured hydroxyapatite as bone substitute in sheep

Abstract The aim of this study is to evaluate the biocompatibility and osteoconductivity in surgical defects of sheep tibias filled with 1% strontium-containing nanostructured hydroxyapatite microspheres (SrHA), stoichiometric hydroxyapatite without strontium microspheres (HA), or blood clots. Santa Ines sheep were subjected to three perforations on the medial side of the left tibia. The biomaterials were characterized by X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) before implantation and by X-Ray Microfluorescence (µFRX) and Scanning Electron Microscopy (SEM) after sheep tibias implantation. Surgical defects were filled with blood clots (control), SrHA (Group 1) or HA (Group 2). After 30 days, 5-µm bone blocks were obtained for histological evaluation, and the blocks obtained from 1 animal were embedded in methylmethacrylate for undecalcified sections. Mononuclear inflammatory infiltrate remained mild in all experimental groups. Giant cells were observed surrounding biomaterials particles of both groups and areas of bone formation were detected in close contact with biomaterials. All groups showed newly formed bone from the periphery to the center of the defects, which the control, HA and SrHA presented 36.4% (± 21.8), 31.2% (± 14.7) and 26.2% (± 12.9) of newly formed bone density, respectively, not presenting statistical differences. In addition, the connective tissue density did not show any significant between groups. The SrHA showing a higher volume density of biomaterial (51.2 ± 14.1) present in the defect compared to HA (32.6 ± 8.5) after 30 days (p = 0.03). Microspheres containing 1% SrHA or HA can be considered biocompatible, have osteoconductive properties and may be useful biomaterials for clinical applications.

Genetic Variants in Folate and Cobalamin Metabolism-Related Genes in Nonsyndromic Cleft Lip and/or Palate

The aim of this study was to evaluate the association of the polymorphisms in TCN2 (rs1801198) gene and in MTRR (rs1801394) gene with nonsyndromic cleft lip and/or palate (NSCL/P) in a Brazilian population. Genomic DNA was extracted from buccal cells. The polymorphisms in TCN2 (rs1801198) and MTRR (rs1801394) genes were genotyped by carrying out real-time PCR and Taqman assay. Chi-square test was used to determine the association between genotype and allele frequencies with NSCL/P and NSCL/P subgroups (cleft lip only, cleft lip and palate, and cleft palate only). Eight hundred and sixty seven unrelated individuals (401 cases with NSCL/P and 466 individuals without cleft) were evaluated. Genotype distributions of TCN2 and MTRR polymorphisms were in Hardy-Weinberg equilibrium. The TCN2 polymorphic genotype GG was identified in 16.7% of the NSCL/P group and in 14.1% of the non-cleft group (p>0.05). Similarly, the frequency of MTRR genotype (GG) was similar in NSCL/P group (15.5%) and control group (17.8%) (p>0.05). Multivariate analysis showed an association between MTRR and the subgroup that the mother smoked during pregnancy (p=0.039). Our findings did not demonstrate an association between TCN2 polymorphisms and NSCL/P, however suggests an association between MTRR and NSCL/P etiology.

Resumo O objetivo desse estudo foi avaliar a associação entre os polimorfismos no gene TCN2 (rs1801198) e no gene MTRR (rs1801394) com fissura de lábio e/ou palato não sindrômica (NSFL/P) em uma população brasileira. DNA genômico foi extraído de células bucais. Os polimorfismos nos genes TCN2 (rs1801198) e MTRR (rs1801394) foram genotipados através do PCR em tempo real pelo método Taqman. O teste do qui-quadrado foi utilizado para determinar a associação entre a frequência alélica e genotípica e NSFL/P e nos subtipos (fissura de lábio, fissura de lábio com palato e fissura de palato). Oitocentos e sessenta e sete indivíduos não aparentados (401 casos com NSFL/P e 466 indivíduos sem fissura) foram avaliados. A distribuição dos genótipos dos polimorfismos de TCN2 e MTRR estavam em equilíbrio de Hardy-Weinberg. O genótipo polimórfico GG do gene TCN2 foi identificado em 16,7% do grupo com NSFL/P e em 14,1% do grupo sem fissura (p>0,05). Da mesma forma, a freqüência do genótipo GG do gene MTRR foi bastante semelhante entre o grupo com NSFL/P (15,5%) e o grupo controle (17,8%). A análise multivariada mostrou associação entre o gene MTRR e o subgrupo que apresentou tabagismo materno durante a gestação (p=0,039). Nossos resultados mostraram que não há associação entre os polimorfismos nos genes TCN2 e NSFL/P, entretanto sugerem uma associação entre MTRR e a etiologia de NSFL/P.

Cytocompatibility and biocompatibility of nanostructured carbonated hydroxyapatite spheres for bone repair

ABSTRACT Objective The aim of this study was to investigate the in vitro and in vivo biological responses to nanostructured carbonated hydroxyapatite/calcium alginate (CHA) microspheres used for alveolar bone repair, compared to sintered hydroxyapatite (HA). Material and Methods The maxillary central incisors of 45 Wistar rats were extracted, and the dental sockets were filled with HA, CHA, and blood clot (control group) (n=5/period/group). After 7, 21 and 42 days, the samples of bone with the biomaterials were obtained for histological and histomorphometric analysis, and the plasma levels of RANKL and OPG were determined via immunoassay. Statistical analysis was performed by Two-Way ANOVA with post-hoc Tukey test at 95% level of significance. Results The CHA and HA microspheres were cytocompatible with both human and murine cells on an in vitro assay. Histological analysis showed the time-dependent increase of newly formed bone in control group characterized by an intense osteoblast activity. In HA and CHA groups, the presence of a slight granulation reaction around the spheres was observed after seven days, which was reduced by the 42nd day. A considerable amount of newly formed bone was observed surrounding the CHA spheres and the biomaterials particles at 42-day time point compared with HA. Histomorphometric analysis showed a significant increase of newly formed bone in CHA group compared with HA after 21 and 42 days from surgery, moreover, CHA showed almost 2-fold greater biosorption than HA at 42 days (two-way ANOVA, p<0.05) indicating greater biosorption. An increase in the RANKL/OPG ratio was observed in the CHA group on the 7th day. Conclusion CHA spheres were osteoconductive and presented earlier biosorption, inducing early increases in the levels of proteins involved in resorption.

The functional EGF+61 polymorphism and nonsyndromic oral clefts susceptibility in a Brazilian population

AbstractNonsyndromic oral clefts are considered a problem of public health in Brazil, presenting a multifactorial etiology that involves genetic and environmental components, such as maternal alcohol consumption. Several candidate genes have been investigated to identify some association with nonsyndromic clefts risk. The epidermal growth factor (EGF) gene is implicated in the normal craniofacial development and its functional +61 A>G polymorphism has been related to cancer susceptibility. It has been suggested that cancer and oral clefts may share the same molecular pathways.Objective Our goal was to evaluate the association between the EGF+61 A>G polymorphism and nonsyndromic oral clefts susceptibility.Material and Methods The case-control study included 218 cleft cases and 253 controls from Brazil. The control group was comprised of individuals without congenital malformations, dental anomalies and family history of clefts. The cleft phenotypes and subphenotypes were determined based on clinical examination. Genomic DNA was extracted from oral mucosa cells obtained by mouthwash. The EGF+61 A>G polymorphism genotype was determined by polymerase chain reaction-restriction fragment length polymorphism.Results We noticed the association between maternal alcohol consumption during pregnancy and cleft occurrence. The A allele and AA genotype were over-represented in cleft cases compared with control group when we considered the bilateral cleft lip with or without cleft palate (CL±P) cases, cleft cases with tooth agenesis and cleft cases presenting family history of cleft, but the differences were not statistically significant. Contradictorily, the G allele was higher in cleft palate only (CP) cases than in control group, showing a borderline p value. Comparing the different cleft phenotypes, we observed statistical differences between CP and CL±P cases. Our data suggest the EGF+61 A>G polymorphism was not related with nonsyndromic oral clefts susceptibility in a Brazilian population, but supported the different genetic background between CL±P and CP. Moreover, we confirmed the potential effect of maternal alcohol intake on cleft risk in our population.